WS500 Regulator Harness (P-type) with CAN high/low wires
WS500 Regulator Harness (P-type) with CAN high/low wires. Includes Alt. Temp. Sensor.
Use this harness for applications where you want to tie into an existing CANBus network using the hi/lo wires only and not have to use the onboard RJ45 cable connectors in the WS500 itself.
Note: CANBus is still available to the WS500 via the RJ45 connectors on the WS500
|Dimensions||25 × 25 × 10 cm|
WS500 Software “Free Upgrade” V 1.2.0Add to cart
April 6, 2020 New Version 1.2.0 includes support for firmware level 2.2.0 just released by Wakespeed!!
If you purchased your software prior to August 25th, 2019 your download links have been removed from your account. To get the new version, simply purchase this product for “Free”.
See detailed description for installation instructions.
WS500 Smart RegulatorFrom:
Bonus !! Buy One and get the WS500 configuration Tool Free, a $ 24.95 value!
Buy two and get the Pro version Free,
a $ 149.95 value!
And if you build it as a kit you save 10% on all accessories !!
(versus ordering items individually)
The WS500 is a next generation Smart Regulator for Marine, Off-grid and RV applications. It is ideally suited to the latest in battery technology and includes CANBus and NMEA2k communications to integrate into an overall Energy Management Network. Select your Wiring harness based on whether you need positive or negative type alternator excitation. You WILL need either a Positive or Negative Wiring Harness. Make sure you include it when you buy. You may also wish to include a battery temperature sensor wiring harness. This is optional but is strongly recommended, especially in “Battery Centric” configurations where the WS500 can reduce its output when your battery starts to warm up.
Scroll down to select your options: