REC CANbus Adapter Cable
$29.95
The REC CANbus adapter cable allows you to connect the CANBus DB9 connector on your REC BMS to either your WS500 or your Victron Network depending on which version you select.
The REC CANbus adapter cable allows you to connect the CANBus DB9 connector on your REC BMS to either your WS500 or your Victron Network depending on which version you select.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Connector Type: | WakeSpeed WS500, Victron CANBus |
Related products
-
Sale!
NMEA 2000 Bridge YDNB-07
$189.00$170.10Select optionsUnifies two physical NMEA 2000 networks into a single logical network, smoothly exchanging messages between them. The Bridge also support filtering and processing of transmitted messages and contains a built-in compiler of a simple programming language. You can create message processing programs on any device with a MicroSD socket and a text editor. One of the CAN-interfaces on the device has high-voltage galvanic isolation and can operate at a higher supply voltage.
-
Sale!
Barometer YDBC-05
$99.00$89.10Select optionsThe Barometer is intended for measuring atmospheric pressure within the range from 300 to 1100 hPa (mbar). The sensor is located inside the device case. Many chartplotters and digital navigation instruments are able to display data on pressure in the form of graphs or show a trend indicator; this allows tracking of trends in the weather change. The Device dimensions, including the connector, are 54x20x20mm, the mass is only 11 grams, so it is suitable for racing yachts. Pressure data output resolution 0.01 hPa (mbar), absolute measurement accuracy is ±1 hPa, relative measurement accuracy is ±0.12 hPa.
-
Sale!
NMEA 0183 Multiplexer YDNM-02
$149.00$134.10Add to cartSmart multiplexer with five NMEA 0183 ports and one SeaTalk port, auto detection of port speed and easy configuration with a click of a button! And, of course, it has flexible filters, routing rules, and supports firmware updates.
The underlying idea was to create simplest multiplexer in the world. In our lab, the project was called “Simple Multiplexer”, but later we added a lot of features and removed the word “Simple”. Nonetheless, we are sure that it is still the easiest to install. Instead of a laptop and software, you’ll only need a paperclip.
Recent forum posts
Reviews
There are no reviews yet.