- B2B Chargers
- Circuit Breakers
- Installation Accessories
- Relays & Contactors
- Smart Regulators
- Yacht Devices
The Barometer is intended for measuring atmospheric pressure within the range from 300 to 1100 hPa (mbar). The sensor is located inside the device case. Many chartplotters and digital navigation instruments are able to display data on pressure in the form of graphs or show a trend indicator; this allows tracking of trends in the weather change. The Device dimensions, including the connector, are 54x20x20mm, the mass is only 11 grams, so it is suitable for racing yachts. Pressure data output resolution 0.01 hPa (mbar), absolute measurement accuracy is ±1 hPa, relative measurement accuracy is ±0.12 hPa.
The Barometer is intended for measuring atmospheric pressure within the range from 300 to 1100 hPa or mbar (225 to 825 mmHg), it provides chart plotters and instrumental displays with barometric pressure data.
This product is designed for weather monitoring. The sensor is located inside the device case. Many chartplotters and digital navigation instruments are able to display data on pressure in the form of graphs (modern Vulcan7, old ST70) or show a trend indicator; this allows tracking of trends in the weather change.
Pressure data output resolution to a NMEA 2000 Version 3 network is 0.01 hPa (mbar), absolute measurement accuracy is ±1 hPa, relative measurement accuracy is ±0.12 hPa. We also recommend our Humidity Sensor YDHS-01, it will provide your instruments with relative humidity, air temperature and calculated dew point temperature.
Device is plug and play, works right our of the box and does not require any settings. Calibration of the Barometer has been performed by the manufacturer. Therefore, you can set an offset from -10.0 to +10.0 hPa for the sensor readings to align with readings from other ship equipment. Programming of the NMEA 2000 device instance, system instance, data instance, description strings is also supported.
The Barometer can be configured by user to turn on or off specified channels of digital switching equipment. The conditions can be either the actual atmospheric pressure or the difference between actual pressure and the pressure 30 minutes or 1 hour ago.
NMEA2000 Micro Male, Raymarine Seatalk NG
Yacht Devices are shipped Free via Air Mail directly from the manufacturer in Europe. Expected delivery is 2-3 weeks from receipt of order. Duty and import costs, if applicable, are not included in the price.
Humidity Sensor YDHS-01
Provides chart plotters and instrumental displays with humidity and air temperature measurements and calculated dew point temperature. High quality sensor with ±2 % RH and ±0.3 °C accuracy in most of the operating range. The device is plug and play; you only need to plug it into a NMEA 2000 backbone to get readings on all chart plotters and instruments on board.
J1708 Engine Gateway YDES-04
A gateway for engines with a J1708 serial interface to a NMEA 2000 marine digital network. It supports the two protocols that work over J1708: the standard J1587 used by many manufacturers and the proprietary Volvo Penta protocol used in engines with EDC I, for example KAD 44 and KAD 300. A J1708 interface is used for connection of gauges, electronic displays, diagnostics equipment and other vehicle modules. This interface was very popular until 2005-2007, when it began to be quickly replaced by the J1939 protocol that is based, the same as NMEA 2000, on a faster CAN network.
Switch Control YDSC-04
$149.00Add to cart
The additional control post. The Switch Control allows viewing of the state and the management of four channels of an NMEA 2000 switch bank from the connected buttons with LED indicators. It is designed to work in tandem with Circuit Control YDCC-04 (contains four latching relays) and is compatible with other NMEA 2000 digital switching devices managed by standard NMEA 2000 PGNs 127501 and 127502.
NMEA 0183 Multiplexer YDNM-02
$149.00Add to cart
Smart multiplexer with five NMEA 0183 ports and one SeaTalk port, auto detection of port speed and easy configuration with a click of a button! And, of course, it has flexible filters, routing rules, and supports firmware updates.
The underlying idea was to create simplest multiplexer in the world. In our lab, the project was called “Simple Multiplexer”, but later we added a lot of features and removed the word “Simple”. Nonetheless, we are sure that it is still the easiest to install. Instead of a laptop and software, you’ll only need a paperclip.